PERFECT FOR PRODUCTION
Combodim XL, Unidim XL and Optodim XL special design allows you to monitor the production line and to receive a quick feedback about any deviation of the working tools.
It is also the best way to speed up laboratory measurements using our in-situ machines, saving a lot of time.
Machines are equipped with features for temperature compensation that ensure reliable and precise results.
An interesting aspect regarding these machines for shafts measurement is the possibility to add optical sensors (optional), which provide a complete check of every detail like radius, grooves, chamfers, and all those profile forms that can’t be measured with typical contact probes.
Optical sensors have three main benefits: programming without drawings, scanning prototype parts, and measuring in shorter cycle times in comparison with contact mode.
FASTER CONTACT PROBES
It doesn’t matter how contaminated the piece to measure is; Combodim XL, Optodim XL and Unidim XL assure a micrometric measurement thanks to length probes and diameter probes (contact measurement).
Due to these machines the operator will get an easier work management and he will be staying in front of the machine just the time to place the workpiece and start the measuring cycle.
Combodim XL and Unidim XL will take care of the rest.
LONG TERM FLEXIBILITY
Multi-sensor machines are the key to fulfill your needs from the first to the last operation using one single machine.
Our Combodim XL is the most rational choice regarding annual manual calibration, so you can save resources and avoid using various instruments that sometimes are designed to check just one feature.
We are available to make dimensional modifications to our machines.
VARIANTS AND OPTIONS
Lenght probe on our machines ensures the highest accuracy on: depth and angle, key slots, location of holes, flat surfaces, axial runout etc.
Contact diameter probe measures: runout diameter, coaxiality, circularity, cylindricity (only Unidim and Combodim).
Optical profile probe (only Optodim and Combodim) scans and controls all the features that can’t be controlled through contact measurements: radius, grooves, chamfers, profile shape, tolerances within a range…
Thanks to our machines almost every parameter of a crankshaft can be measured. Besides, Combodim XL, Unidim XL and Optodim XL can offer the best in terms of versatility, when they are equipped with all the sensors available: a whole package for all your production needs.
Cam follower is the solution if you need to measure the complete profile of a cam during its rotation. Concave cam profiles can be measured through roller wheels.
Those measuring benches are designed to face a lot of challenges in addition to standard shafts.
Therefore, our machines check a wide range of particulars such as injectors, electrical motor crankshafts, steering shafts and racks, turbine shafts etc.
Runout is the best solution to measure properly the piece during its rotation.
PIECE LOADING SUPPORT SYSTEM
Our machines are equipped with “Vè” device which allows the operator to place and remove the driveshaft on the machine easily.
It’s possible to customize center tips in order to satisfy all your needs.
Laser light beam projector, allowing the operator to easily and radially index the part to be measured.
Useful in production, and more convenient for the operator, it guarantees an automatic recognition of the relevant programming and to record all traceable data.
Workpiece temperature sensor provides a complete report of the temperature and the thermal expansion of the workpiece in real time as it’s being checked.
Temperature sensor is a standard feature.
Automatic and integrated calibration zone/ depending on time and/or temperature
230 or 400 VAC, 50 Hz
Humidity ≤70% – Temperature Min. 10°C / Max. 45°C
≤70 dB (A)