Measuring Machines for Gears and disks

  1. Casa
  2. /
  3. Products
  4. /
  5. Exameca Mesure
  6. /
  7. Measuring Machines for Gears...

PERFECT FOR PRODUCTION

Interdim special design allows you to monitor the production line and to receive a quick feedback about any deviation of the working tools.

It is also the best way to speed up laboratory measurements using our in-situ machines, saving a lot of time.

Interdim is equipped with features for temperature compensation that ensure reliable and precise results.

OPTICAL SENSOR

An interesting aspect regarding this machine is the possibility to add optical sensors (optional), which provide a complete check of every detail like radius, grooves, chamfers, and all those profile forms that can’t be measured with typical contact probes.

Optical sensors have three main benefits: programming without drawings, scanning prototype parts, and measuring in shorter cycle times in comparison with contact mode.

FASTER CONTACT PROBES

It doesn’t matter how contaminated the piece to measure is; Interdim assures a micrometric measurement thanks to length probes and diameter probes (contact measurement).

Due to this machine the operator will get an easier work management and he will be staying in front of the machine just the time to place the workpiece and start the measuring cycle.

Interdim will take care of the rest.

LONG-TERM FLEXIBILITY

Multi-sensor machines are the key to fulfill your needs from the first to the last operation using one single machine.

Our Interdim is the most rational choice regarding annual manual calibration, so you can save resources and avoid using various instruments that sometimes are designed to check just one feature.

We are available to make dimensional modifications to our machines.

MEASUREMENT FUNCTIONS

VARIANTS AND OPTIONS

- 2 standard contact measurement heads Z/Y and X/V with Overball
(diameter measurement option)

- 1 set of optical sensors from 10 up to 75 mm based on the radius
(profile inspection)

- 1 rotating table

- Additional X axes table (optional)

OVERBALL

Specific machine that combines standard inspection with overball diameter.
The machine is equipped with a 7 spheres cartridge and an optical probe.

TECHNICAL FEATURES

CALIBRATION

Automatic and integrated calibration zone/ depending on time and/or temperature

POWER SUPPLY

230 or 400 VAC, 50 Hz

OPERATING CONDITIONS

Humidity ≤70% – Temperature Min. 10°C / Max. 45°C

NOISE LEVEL

≤70 dB (A)

ALL OUR SOLUTIONS

COMBODIM – UNIDIM – OPTODIM

COMBODIM XL – UNIDIM XL

INTERDIM 3D – 4D – 5D

HMI – ATLAS

  1. Casa
  2. /
  3. Products
  4. /
  5. Exameca Mesure
  6. /
  7. Measuring Machines for Gears...